PM80 ATEX Air Compressor for offshore use
With an airflow of 0.75 m³/min, the PM80 is often used for air tool use in ATEX zones in locations where air is not otherwise available and requires only 11A / 5.5 kW to operate.
Designed for applications with limited space and crane capacity, the PM80 is particularly suitable for use on even the smallest offshore installations.
The compressor has automatic start-stop, which reduces power consumption. In addition, it can be connected in series with multiple compressors if a higher flow is needed. Its long service intervals of 2000 operating hours mean that it runs for a long time without the need to stop and interrupt work. Finally, it has a very low noise level which improves the working environment.
Technical data
| Size (L x W x H): 1650 x 820 x 1230 mm | ATEX classification: Zone 2 – II 3G IIB T3 |
| Frame type: ISO 10855-1:2018 | Weight: 654kg |
| Surface pressure: 484 kg/m² | Electrical connector type: CEAG Ex 32A |
| Air flow: 0,75 m³/min | Power supply: 400V 50 Hz |
| Noise level: 79 dB | Power: 11A / 5,5kW |
| Hose connection: 1 x ½” CEJN + 1 x 1” CEJN* | Max pressure: 10 bar |
*customisation is possible
Accessories for PM80 ATEX Air Compressor
Air hoses
Pressure regulator
Air Receiver (90 l)
Hi, my name is
Kristian Neldeberg Nielsen
If you have any questions regarding our offshore and rental products and services, please do not hesitate to get in touch with me.